Save Money on a Good Primer

When I have more priming to do in my job it is always dilemma, where to get a primer- in the closest paint store or in these big chain stores like Home depot or Menards. 

Today I will go thru the project where I had to put primer over the spots made by candle smoke. So it means that:

1) I had to consider which primer would block candle smoke spots better.

2) Other thing was- my client wanted to paint the ceiling and walls with one coat. It means primer should have strong pigment so that ceiling and walls after primer coat should be nicely white covered. 

I will be using white paint for the ceiling and one of white colors for the walls. That's how it looked ceiling and walls at the start

I started search for teh primer options. I have checked Home depot store and was considering Zinsser primer, but then I have found cheaper option Kilz primer below $10 price.

When I started priming  the first impression was good, pigment was strong and nicely covered smoke spots. Only unexpected thing was the color. At the start it had gray light tone, but in a drying process it turned to the white color.

After one coat of primer

And then after one coat of ceiling paint (I used Sherwin Williams extra white color flat finish paint- color was close to the primer color) and one coat of wall paint the result was very good!

I want you to know, that I am not advertising any of mentioned brands and stores. My goal is to share my experience with you. Next time I will probably consider this primer again, because of good price, coverage of smoke spots and strong pigment which made surface good enough to finish walls and ceiling with one coat of paint. 

House Painting Questions

Hello everybody! After Easter I decided to put Skype button on my blog. If you are starter in painting business or private house owner considering to paint your house, make some drywall repair work and you have some questions-I am here for you. If you have some practical questions and I can answer them- I'd be happy to help you. Or if you have some ideas about my blog themes I would be grateful to hear from you. Fell free to use it! Thanks.

Scoring tool for wallpaper removal

I already posted about wallpaper removal in my earlier post. Today I would like to focus shortly about Scoring Tool for that purpose. As I mentioned we use it for making small holes on wallpaper for better water absorption  thru the wallpaper .

In my next video I want you to show how does look the back side of the wallpaper after using this tool. You can see water marks on back side. It helps to get wallpaper off the wall, when the moisture gets in.

Our goal is to make big peaces of wallpaper to get peeled from the wall. Because sometimes you can go just inch by inch. It happens when wallpaper crew didn't put sizing primer before starting this process or did put some extra glue on the wall. Sometimes it happens when wallpaper is very cheap and very thin.

How To Decorate Easter Eggs?

How to decorate eggs it's my question to you today and I have to admit, that it is a weaker side of my painting skills ☺. Every year starting with my childhood growing in Lithuania I usually was involved in a process of decorating Easter eggs. The main technique mama learned me and my brothers to use was onion peals, wrapped around the egg and pushed in to a peace of nylon sock by fixing with a regular thread. After that put eggs in a boiling water with a desirable color of fabric dye (in those times we had immunity against all kind of hazardous chemicals ☺). The Result of decorating was amazing-

colors would be deep and intensive and we would enjoy seeing "maps of the world" on our eggs and competing with my brothers which egg is the most beautiful. 

But today decorating eggs is a biggest Easter challenge to me. I tried hard to move this responsibility on to my kids, but so far it wasn't successful." You are the painter (they say) and it is your responsibility to manage this process". Those products in the market does not work so strong as it used to in my childhood. Paint kits, tablets, powder are much weaker instructions are complicated (you should boil egg first, than put in to separate plate with dye, ad some vinegar , who knows what percentage exactly 4,5.9% ? OK may be I will stop right here about these challenges. I just will go to the stores, maybe I even will use natural ways I have red about decorating eggs by using red cabbages, beets, spinach, coffee.

As you can see on the picture our dining room is getting ready for the Easter. My wife is good with interior design and decorating tables for different occasions. I will do my best to make Easter eggs shine on the table. If you have some advice please help me!!! You are welcome put them in a comment box. Happy Easter Everybody! 

Cracked vaulted ceiling corner

Very often I have fixed cracks along a vaulted ceiling corner. Sometimes I find them caulked. Caulk can be used if the crack is tiny. Today I have situation where the crack doesn't go right along the corner, but is twisted and peeled.

What steps do we need to take to fix this corner.

Step1 By using painters 5 in one scraper clean up the peels from the corner. Put screws along the corner on the ceiling and the wall. Use stud finder to locate studs. By putting screws we make all drywall sturdy and it is more guaranteed, that this fixed corner is going to last longer. Of course if a house still in a settling process, it makes huge force which moves wooden constructions and forces drywall to crack. Materials we use to fix the corner not going to stop it. But what we can do- to do the best job we can to prevent drywall side by the corner from having a movement.

Step2 Patch the corner

Step3 After it is dry, send and prime it and paint the ceiling part 2 coats, by allowing completely to dry in between coats. After ceiling is dry do the same with walls. Paint two coats by leting it dry between coats.

2nd coat of paint is still drying, so we can have little nap an go home ☺.

One room painting cost

What questions do we need to ask before hiring painting company or self employed painter to paint your house or just one room. Let's take simplest basic situation- painting of medium size bedroom 13'x15':

1. Do we paint the ceiling? If yes- does it have color tone on it? If we choose white ceiling color sometimes we will need two coats. Look at this picture how it seems ceiling with color tone. It is hard to see this until you put white color on it. Than you can see the difference:

2. One or two coats  to the ceiling? After first coat we can see the difference between brush painted edges and the roller. It means we need one more coat of paint

3. Does the ceiling need some repair (nail pop, cracks, tapeline repairs)? If the ceiling has nail pops it will need to scrape it and put extra screws by the nail pop to secure drywall from further movements.

4.Does it enough to paint two coats to the walls? Sometimes if you have dark painted walls you might consider one coat of primer and two paint coats on the top. Especially if you paint with the yellow color ( like linen white) paint on darker walls you might need three coats of paint or one coat of primer and two coats of paint.

5. Do you consider accent wall? If you do it will need one more gallon (because quart might not be enough) of paint and extra time by cutting nice lines at the wall corners.

6. Do walls need some repair (cracks, nail pops)?

7. Are you considering to paint trims?

After these questions are asked we can try to put some numbers together. Let's say we have one experienced painter and try to count how many hours it would take to paint one room.

1.Prep work: moving furniture, taking of drapes, cover plates, putting drop clothes (tarps), covering everything with the plastic sheet, baseboard taping, etc.                                    1.5 hours

2. Ceiling repair work (fixing cracks, tape lines, nail pops) scrape, patch, dry by using dryer, sand, prime

                                           1.5 hours

3. walls repair work (fixing cracks,nail pops) scrape, patch, dry by using dryer, sand, prime                   1.5 hours

3. Painting first coat to the ceiling:take off can light rings, cut ceiling edges with the brush,paint around the lights, role the ceiling with the roller

                                           1.5 hours

4. Painting  second coat to the ceiling if needed. It usually goes faster.

                                            1 hour

5.First coat to the walls: paint wall edges with the brush, role walls with the roller.                               2 hours

6.Second coat to the walls. It usually goes faster.

                                            1.5 hours

7.Take off masking tapes,do touch ups if needed, put back cover plates, drapes, move furniture back,vacuum clean the floor.

                                              1 hour

---------------------------------------------------------------------------------------------

                                             

One coat to the ceiling, two coats to walls:  10.5 hours

Extra coat to the ceiling:                                         1 hour

Accent wall nice lines:                                             0.5 hour

So you have 10.5 to 12 hours of one painter work time for one room. Now you need to find hourly rate of each contractor or painting company. It might vary depending on region, size of company, time of season (winter time is not busy for painters, so it could be discounted prices). This number might be starting with $35 to $50 or more per one work hour.

So if we have 10.5 hours option , labor could cost $367 to $525 +$100 materials.

For 12 hours it will be: labor $420 to $600+$120 materials

Materials for one room approximately: 1gal paint for the ceiling $20 to $40 per gallon gallon and 2 gallons for the walls $20 to $50 or more, depending on the paint brand and contractor discounts at the store.

Keep in mind, that basic painting could be less costly. I tried to show situation where you have 3 hour of fixing work, ceiling painting. Often people choose paint just the walls, so the cost could be decreased significantly.

  I didn't talk about trims this time. Let's leave it for the next time. So, have fun and paint it easy!

How To Remove Wallpaper

If you have idea to get rid of  wallpaper and need some help how to do this I am here for you, because yesterday I did exactly the same ☺. First of all you will need some tools: 2gal bucket, scoring tool, sponge, scouring pad, towel, wallpaper stripper liquid:

First of all keep in mind that wallpaper has two layers of paper. At the start you can try to remove top layer without moisturizing it, just peel corners of wallpaper and try to remove it from the wall by keeping both sides of wallpaper and ripping like a sheet along the wall. If it does not go this way it means you will have more fun.

1 Step Take scoring tool and make scratches on the wallpaper for the better water absorption to the top layer  

2 Step Pour hot water in to the bucket, add wallpaper stripper in to it (I like this one vs gel).

Take a wet sponge and moisturize wallpaper one or two lanes at the time and leave for about 15 minutes (you can repeat it several of times).

3 Step Remove top layer of wallpaper

4 Step Moisturize second layer by using wet sponge and remove it

5 Step Wash up the glue from the wall by using scouring pad and rough towel . 

6 Step Patch, sand and prime scratched spots after wall is dry and paint walls.

Thank you for reading, have fun ☺.

How To Fix Wall Cracks

Cracks are probably the most noticeable imperfection at your home. It always gets your attention when you walk through the room with the cracked wall. After a number of these walks I probably will get your call by asking to fix a crack☺ . I will walk you through the process how I am fixing the crack.

Step 1 Open the crack, by using 5 in one painters tool (you can use a utility knife as well). It is important to scrape all peals and cut along those cracks for the purpose to  make a groove for the mud.

Step 2 It is necessary to put screws along the crack. If it's no stud behind the crack, you can use stud finder to detect it. Even one or several screws will make a difference in the future. Because the place you are fixing and patching needs to be sturdy and not suppose to have moving parts. Otherwise it can brake that crack in the same spot after a while. After securing the place with screws you need to put  a mesh tape on the top. It will hold the mud firmly and after its dry it will make better bond with the drywall.

Step 3 Now we are ready to patch it. The first layer of mud can be rough, the purpose of it is to fill all area with the mud and to cover the mesh tape.

Step 4 After first layer is completely dry you can scrape the surface easy, to make it as smooth as possible before second layer by using 5 in one tool or drywall knife. Now its time for the second layer of mud.

Step 5 After second layer of mud is completely dry we should check the surface of the patched are. If everything is covered well, no mesh tape signs on the top, we can start to sand. If you think that it needs third layer of the mud- do it.

Step 6 After sanding a patched area we need to prime it first before painting it.

The crack is fixed now and no more bothering of our attention ☺.